First lets name the best manufacturers of soldering stations:
- Pace
- Hakko
- Metcal
- Edsyn
- Xytronics
- Weller,
- Goot
- Den-On
- Ersa
- JBC
Now in terms of quality they are all good, most of these will last 10 year and up. In 10 years most of them will need new tips and new cord between the iron and station. This is normal!
WHen choosing the best station we need to look the station for today needs. Today we need to solder lead free, multilayer boards and for this we need fast termal recovery. If we use old station we need to turn the temperature UP to compenzate for slow termal recovery, once old style soldering station reach melting point it will melt solder but temperature will not stay there, it will run higer and at one moment start destroying parts and PCB.
If we set temperature for lets say 350C old station will not be able to do the job, multilayer board will drain temperature and no soldering can be made.
Fastest termal recovery has JBC, it melt solder within 2 seconds once station is turned on. Second one is Metcal MX5010 with around 5 seconds, the same as Goot station.
Pace station is ready in like 6-7 seconds HW-70.
Ersa and Hakko FM202 need around 9 seconds to reach 350C.
Other stations needs more than that and they are not my recomendation (did not test newest Edsyn).
Also Weller MT1500 is fast but it often overheat when used on multlayer boards, it reach temperature very fast but sensor is to slow to sense that temperature is already high..
Now, this is interesting. If I would choose what station I enjoy to use I would say ERSA. It has something to do with tips, they are all fast recovery all get the same temperature but somehow Ersa melts solder just nice. If you apply soldering wire to ERSA solder it just spreads around very easy while on some other stations you have feeling that tip is actually made of ceramic and solder wire does not like it.
If I would name the best quality soldering station it would be Edsyn, but dont buy these because it will last you forever and you wont have a chance to try other brands :))))
The best iron handle has new Metcal MX5010, its like a pen, very accurate.
Please not that those Den-On SS-1800 does not last more than 2-3 years if you use them every day.
So my recommendation for new station is:
- JBC (far away from others)
- Ersa
- Metcal
- JBC
- Pace
- Metcal
- Edsyn
Thanks for the review. was very good info for beginners.
ReplyDeleteHowever I think you may add some not so pricey soldering station brands or models, like Aoyue and Atten. I can't think of anything bad to say about these irons, they are cheap but work very well. Although they all look like Weller/Hakko knockoffs.
If you want to get a nice soldering station under $80, or even less, you can go ATTEN or Aoyue.
I just read your article and found it very informative but still it is very complicated and time consuming to build a home made soldering station. Well, if you are looking to buy the best one for your needs at an affordable cost then it is recommended to take a look at this list of soldering irons. I bet you will find the best one for your needs on this link.
Deleteif goot rx802as model is good ?
ReplyDeletewhat about Gordak and yihua
ReplyDeleteHi, thanks for your review on best soldering irons but still there are some features of soldering irons that are not mentioned in this article. If someone is looking to buy the best soldering iron then I'd love to recommend this list of best soldering irons where you will find the right one for your needs.
ReplyDeleteSoldering iron can be used for multiple purposes.
ReplyDelete9 Best Soldering Iron Review 2017
Best Soldering Irons
Forgot made in USA American Beauty and Hexacon. Not sure why these don't make your list if Pace and Metcal do.
ReplyDeleteAmazing!! It's very informative. Learn here for more soldering iron tips. Also, you can check best soldering station under $100. check out more here
ReplyDeleteMetcal have a great new high thermal demand handpiece
ReplyDeletehttps://www.youtube.com/watch?v=oijUHLWoZRkI
What a GREAT idea! I love this article.
ReplyDeleteCheck here for more information. Thanks
RC Jet
ReplyDeleteSoldering iron
Sky Flight Rc Jet
kerui Security alarm
weller soldering
Flightline RC Plane
This comment has been removed by the author.
ReplyDeleteQuick ts1200a
ReplyDeleteI am looking for a soldering station which should be good in quality and economical as well.
ReplyDeletePlease guide me from the below link which should best suits me according to my requirements.
Thanks in advance.
soldering station price in pakistan
Amazing!! It's very informative.
ReplyDeleteThanks for your review on best soldering irons.
ReplyDeleteThanks
Thanks for the review. was very good info for beginners.
ReplyDeleteThanks